Forums
New posts
Search forums
What's new
New posts
New media
New media comments
New profile posts
Latest activity
Media
New media
New comments
Search media
Members
Current visitors
New profile posts
Search profile posts
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Bobcat Skidsteer Forums
General Bobcat Skidsteer Forum
753 motor carrier seal removal
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support SkidSteer Forum:
Message
<blockquote data-quote="OldMachinist" data-source="post: 76596" data-attributes="member: 437"><p>I looked at the service manual for your serial number and it says to remove the carrier assembly to service the bearings because you need to use a hydraulic press to get the shaft out after removing the snap ring. Also I don't think there's enough space in there to push the shaft out while the assembly is on the machine.</p><p>The tube lines you mentioned go to the lift arm bypass and the traction lock valves and they have to be removed to take the carrier assembly off. <strong><u>If you have the lift arms up to work in this area make sure you have the lift arm support in place or the arms will drop when you loosen the lines on the bypass valve.</u></strong></p></blockquote><p></p>
[QUOTE="OldMachinist, post: 76596, member: 437"] I looked at the service manual for your serial number and it says to remove the carrier assembly to service the bearings because you need to use a hydraulic press to get the shaft out after removing the snap ring. Also I don't think there's enough space in there to push the shaft out while the assembly is on the machine. The tube lines you mentioned go to the lift arm bypass and the traction lock valves and they have to be removed to take the carrier assembly off. [B][U]If you have the lift arms up to work in this area make sure you have the lift arm support in place or the arms will drop when you loosen the lines on the bypass valve.[/U][/B] [/QUOTE]
Verification
Post reply
Forums
Bobcat Skidsteer Forums
General Bobcat Skidsteer Forum
753 motor carrier seal removal
Top