Forums
New posts
Search forums
What's new
New posts
New media
New media comments
New profile posts
Latest activity
Media
New media
New comments
Search media
Members
Current visitors
New profile posts
Search profile posts
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Bobcat Skidsteer Forums
General Bobcat Skidsteer Forum
1992 743B cold starting PAIN
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support SkidSteer Forum:
Message
<blockquote data-quote="Tazza" data-source="post: 7197" data-attributes="member: 82"><p>There is no easy way i'm afraid.</p><p>You will need a 12mm deep socket on a 1/4" drive ratchet set.</p><p>The hardest part is getting the socket between the inlet manifold and the outside of the plug. At the injector pump you will need to remove a tube line or 2 to gain access. Just take your time and you will be fine. Your best bet is to take the plug from number 4 out first as its the easiest and get it matched. From bobcat its far too expensive. I paid less than $10 AUD each for mine.</p><p>Before you start pulling plugs, check they are getting power, it could be as simple as a dead relay.</p></blockquote><p></p>
[QUOTE="Tazza, post: 7197, member: 82"] There is no easy way i'm afraid. You will need a 12mm deep socket on a 1/4” drive ratchet set. The hardest part is getting the socket between the inlet manifold and the outside of the plug. At the injector pump you will need to remove a tube line or 2 to gain access. Just take your time and you will be fine. Your best bet is to take the plug from number 4 out first as its the easiest and get it matched. From bobcat its far too expensive. I paid less than $10 AUD each for mine. Before you start pulling plugs, check they are getting power, it could be as simple as a dead relay. [/QUOTE]
Verification
Post reply
Forums
Bobcat Skidsteer Forums
General Bobcat Skidsteer Forum
1992 743B cold starting PAIN
Top