Recent content by Yoda

Thanks Seth

Seth, which is the plug cap you are referring to?http://www.colemanequip.com/CASE/Images/1845C/CASE-1845C-Hydraulics-JAF0122751-nFYt-normal.gif

I will be following this thread closely. my 1845c does the exact same thing

I bought an 1845c about a year ago, I'm new to skid steers myself so by no means an expert but I thought the c stood for cummins. Pretty sure if you have a diesel engine your machine is a 1845c and it is a cummins. I think the ether cold start was an option, you probably do not need it hooked...

Yes it pulls the same way forward and reverse, I would guess maybe in ten yards travel distance it would pull a foot to the left. next time I have it out I will measure.

Tazza, my 1845c tends to drift one way, both sides have plenty of power, I also noticed the side that is slower, the drive motor has a very slight oil leak, just enough to get a damp with oil on the bottom of the motor after running it for a couple of hours. will it hurt it to just run it this...

Thanks, that helps, I think I will go for the one you have.

Thanks for the responses, I have been looking at that one on ebay, I'm trying to weigh my options, that one is at a good price, I'm trying to decide between it, and one almost identical but made of 1/2" material at about double the cost. I have allot of clay and rocks I'm a little worried I...

lesgawlik, what did they charge you for shipping, where abouts do you live, thanks

Brogen, is the one you bought the same as the one on ebay?

Is this true, I am new to skid steers and bought a Case 1845c last summer, I am getting better at operating it, but still find it much easier and smoother to operate at half throttle. One reason I can come up with in my head, is maybe you need the engine at full throttle so the fan pushes enough...

Hello, I've been reading the forum for some time now and thought I would join and maybe get some advice as there seems to be some very knowledgeable folks here. Last spring I bought an 1845c, 1995 I think, since it has gotten cold, aprox. 25 degrees out or so, when I start the machine, the...