trobbl's latest activity

There is no adjuster for chain tension. I've been in there and I don't understand why Bobcat didn't provide a way to adjust chain tension.

Great progress! I know there's a lot of work ahead, but I'd say you're defiantly over the hump.

Everyone online look like they weld a bead around the race and when it cools it will come right out. Going to give that a try..Then take...

I replaced one bearing, but the races were in good shape. I'd bet there is a good tool for that, but I've never researched it.

Considering the amount of work it took to get to this point, I'd probably pull all the axles and inspect them. Even if they look good...

It's been a while, but I think mine pulled apart with no problem after I got the 4 bolts out. I worked on the side of the pump that...

I don't think mine has a drain. Wes from Watch Wes Work on Youtube uses a suction pump that works really good to get all that oil out...

I've never had the front portion of that pump apart. The back section I took apart uses a gasket that is pressed steel almost like a...

I just heard from a commenter on the video where I fixed the leak on the steering shaft that there is an easier fix than my method. He...

You are correct. The brake block is bolted to the underside of that plate. See the item labeled caliper assembly below. I don't...

Yikes! I though it was cramped working on my machine. I know these are compact machines, but I wish the design engineers had to spend...

I was lucky because mine popped off without a struggle. WD40 and some heat might be needed to get it to go. You should be able to get...

I got mine on Amazon from a seller called Maple Ace. I checked and they don't have it available right now. There are other sellers out...