Recent content by tgravescs

Thanks I didn't realize they had parts catalog online.

Hey, I have a bobcat 709 backhoe attachment and am putting new seals In the cylinders. I thought I ordered all the kits, but I dont have The correct seals for the cylinder that controls the bucket. Anyone know what seal kit works on that cylinder and possibly where to order it from? Thanks, Tom

thanks, where did you get the Orings? I ended up ordering a new Char Lynn from loaderpartssource but it didn't come with the large Oring/seal and doing a quick search nothing else pulls up. I guess I could call the bobcat dealer.

Well I got them swapped and now the left side is being slow. I guess that motor is getting weak. I had a feeling when I started to tear into it that was it because the good one is an after mark (Char Lynn) and the weak one is a bobcat. Any recommendations on where to get a new one at decent...

so I started to tear into the drive motors. Got the control panel off and washed things off. It sure doesn't looks like the drive motors will swap from one side to the other and still have hosts and such hook up properly. Am I missing something? Thanks, Tom

Thanks OldMachinist. I drained the fluid and took the right filter off. It looks brand new. The linkage looks pretty good too. The right slide might have a little bit more play in it but not much. I guess I'll try swapping the drive motors. I downloaded a service manual for it but its...

Thanks for the reply. Its a C series. serial number on plate in the back is 512718622. I believe it does have a filter underneath the hydro reservoir. is that what you are referring to? I only noticed one on the right side but I never really looked for one on the left side too. I'll have to take...

I got a used Bobcat 753 with low hours a few months back. The right side steering is slower both forward and backwards. Sometimes it kind of hesitates and then jumps when it finally kicks in. Not as bad when you have it throttled up. Would this be a linkage adjustment or more likely a motor or...