Recent content by speedbuff

could you measure the diameters of of the high and low pulley's for me ?THANKS A MILLION FOR THE PIC? Is there a manufaturers name on any of them? The machine is quite powerfull for its size .I have mine working fairly well with a fixed pulley .I would like a toothed bucket for digging .I do...

There is a dirt cheap cd manual available on ebay .I bought one seems to contain all service procedures

I have a 310 bobcat with a factory k 341 kohler engine my electric clutches have been repaced by a straight pulley .This is not the safest way to do a repair and I would like to intall the 2 electrical clutches on the 1 1/8 shaft .the clutches are no longer available from bobcat but they are...

COULD YOU SEND ME SOME PICS OF YPOUR BOBCAT ESPECIALLY THE CLUCHES?

Itoo have heard horror stories of bobcats mixing oils and subsiquent failures however on these units you can use 10w30 or 10w40 engine oil instead of clark part#6563328 this is right out of the bobcat manual .I suspect that this is due to the fact that there is no hydrostatic drive used on this...

I am still hoping someone can shed some light on this issue for me .Even the model number and clutch manufacturer would help.I have read most of the posts on 310 and 313 skidsteers and noticed there are not many replies. Are there any other owners of these units on the board? Please help me out...

I am a newbie to this forum who just became the owner of a well used 310 skidsteer .The unit is in surprisingly good condition .Except the drive clutch .I have purchased a manual but it doesn't really show a good pic of the clutch nor an explination of its operation .My skidsteek has had a...