Recent content by Smokin S

I was going into a dirt pile today and the controls locked up. It won't move or the bucket controls work. The controls are locked and a buzzer going off and a warning light with a gear and two arrows pointing into in with a oil drop in the gear. Machine starts all safety lights are on so that's...

Are these accurate? Can they be easily changed? Looking into buying a machine wanting to know if the hours are accurate.

Tool- did you post the info yet? I did't know if i missed it or you have been busy and not had time. Not rushing you just checking on it.

Ya that would be great. how much money did you have in parts and how much time did it take you. Where did you get the parts from.

so i have not hurt the drive motor yet? Check the case drain filter and the brake? Like i said the drive works fine, machine is currently setting and using my other machine till i can tear into it.

I have a t300 and the drive motors work fine but the right side has a squeal. Could this be the bearing i have seen them talkin about it other threads?

Goose- any help now? or anybody else?

i did the case drain test today, i had a trickle no stream. i did it at idle and did't block the machine up either. What's the next thing to look at?

goose- any help on checking the loop flush valve? I looked tonight and found the drive motors. Where's a good place to source parts at?

Where can i find a service manual for this machine?

How do i check the loop flush valve? I checked the ball joints on the levers today and they working good moving lever back and forth, i did't check to see if they shaft is stripped today, ill do that tomorrow. where are the wheel motors located, i did't look close enough today. What do you mean...

How can i diagnose this problem forsure? Can i take a hose off and check the pressure with a gauge? And if so what should the pressure be? How big of a job is it to get to the drive motors?

Ok, ill check that today, but i think that is ok. I changed hyd filters. I bought it with this problem, used it 50 hours or so with it acting up but getting it to work right after messing with left side lever. Now i can't get it to work right at all. When i had problems and trying to get it to...

I have been having problems with the left side wheels not moving to creeping on a 1999 85 xt. If you play with the joystick for awhile you can usually get it to work like it should. This makes me think that i have a valve sticking. Anybody have any ideas where to start looking, as i will be...