Recent content by Skidmarx326

Incredibly helpful. Appreciate it Phil

I was running skid steer today, and at one point I got a E001613-04 telling me there is a fault on injector 2 & 3. Fine. Then I looked for new injectors, at a cost of $800/ piece. Before I drop $1,600 on new injectors I wanted to find out if it was worth time invested to pull injectors 2 and 3...

Hello everybody. Outside of my idler wheel there is another wheel which I cannot find in my service manual. This wheel contains a 3/4" hex bolt which passes through the center of the tensioner wheel. It is loose and is rattling as I am running the machine. Upon inspection, I am trying to back...

So I changed the fuel filter out, threw a bottle of anti gel in, and filled the diesel up to the neck and it ran great after that! thanks everybody for the advice and input. I didn't actually need to pull the fuel rail pressure sensor off at all. I also brought the skid into the garage and put...

Has anybody had any trouble with wheel bearings running OTT steel tracks? I had to flip my tires around to gain enough clearance to clear the boom arm, but I know this adds more stress to the wheel bearings. OTT tracks or a tracked machine? Pros and cons to each? I have a wheeled machine and...

I haven't had time tonight, but tomorrow night i will be changing the fuel filter out and throwing some anti gel in as bobcatguy had suggested. I will also try to pull the fuel rail pressure sensor to and see what it does. My machine was doing this just sitting idle not running any hydraulics...

Thanks much for the input bobcatguy! I will try all of the above and let you know the results.

Hey all, I am rather new to heavy equipment operating. I do well mechanically speaking, but am certainly no expert. I had purchased a 2014 S650 back in April of this year due to the serious need of some landscaping at home. I am looking into using this machine as an investment to do work for...