Remote95's latest activity

Update 4/30 : Thanks to all for ideas and insight. I apologize as this machine is new to me with No History known, so Im going to try...

Update 4/24, We have removed and blocked off the EGR/ heat exchanger ports, But have found that not to be the problem? Today after...

After load testing battery, then replacing battery cables, I believe I have a starter issue. Can anyone please tell me the best way to...

EGR/Cooler 4/17 update. After thinking last night about the 2 ports on the EGR/Cooler that I looped together i realized that that would...

Thank you for helping. I think you are close to the problem. I have been told that the EGR/Cooler can go bad an it will mix the...

Update and 4/15 Question. To simplify my presvious post of 4/15 I simply did the following. I loopedthe hoses cominf from down side...

UpDate 4/15 EGR/ cooler isolation. Today I connected a second hose between the 2 ports that were open. These 2 ports were open because...

Thank you, Granted the ordinary pressure test would work but because of the compactness of a skid steer I was trying to avoid that. If...

Thank you in advance! I am totally cluless about this part of a engine. I understand that removing the EGR/cooler and installing...

Please instruct how to isolate the EGR/intercooler so radiater can be pressured to check for head gasket/ block problem?

Yesterday tried to bypass the EGR/cooler and was unsucessful. I did connect the two hoses coming from downward the engine block on the...

Much thanks for the advice. Today I took a better look at the EGR Cooler and noticed in stead of two there are actually 3 hoses maybe...

FOTON you were spot on. The Negative terminal and wire to it was corroded on the inside. Whenm trying to remove to clean it seperated...

Another Question, I was told today that I could take the two hoses that go into the heat exchanger/Egr and splice them together thus...

UPDATE # 2, Today solved I think the electrical issue. mrbb was insightful, While trying to clean battery Terminals I moved the...