Recent content by pro70z28

Thanks Shane. It sure comes in handy.

Might have to copy & paste the address in your browser. http://media.putfile.com/track-Loader-tree-attachment

I built a backhoe attachment for the track loader. Then I added forks so I could pick up logs. Works pretty good. http://media.putfile.com/track-Loader-tree-attachment

Thanks for the reply t190wt. Turned out to be just a little air in the line from letting it run out of fuel. It's been running fine the last few months.

I took it off the trailer today to do some lifting around the shop. It almost died a couple times getting it off the trailer and 2 -3 minutes later it did it one more time. Then the rest of the day it ran without a problem. Could it be I got air in the fuel lines because I let the fuel level get...

Thanks for the welcome everybody

I'll check that out. thanks Tazza. Mine's a Kubota also.

I posted this on my new member thread but thought I'd put it out here, hoping somebody might have a solution... I had a little problem today on the job. The engine died out a few times. I thought it was low on fuel (it was almost empty) so I dumped in about 5 gal. It still did the same thing...

The one on the exhaust side is easy to get at. The one on the starter side is buried somewhat. I'll check them out. I had a little problem today on the job. The engine died out a few times. I thought it was low on fuel (it was almost empty) so I dumped in about 5 gal. It still did the same...

Thanks for the welcome.

One more of the backhoe in use.

Another shot

Sometimes these pics. work, sometimes not.

I built a backhoe attachment for my MT50. I built the bucket out of 3/16'' plate. I then make an attachment for the bucket that picks up sign posts and sets them in the hole. I used the post setter yesterday for the first time. It was as easy as planting toothpicks. We used to put these in by...

Well after posting in a couple different spots i found this thread. A little backwards I guess, but I'm here now to introduce myself. I run a 1 man sign shop and use my MT-50 to do allot of the heavy lifting. I'm making attachments as i have time to make sign intalls, etc. easier & faster. Hope...