Recent content by OSHT

ok replaced the otter roller with humv plastic u can buy this stuff in long lengths and cut to size. the OD is good but the ID needed to be machined to size but that did it fixed my track climbing problem thanx again ..Mark

just tight about 65ft. pound would do it

Bison I like the info on the roller ware,,the larger rollers were tapered on the inner outside of cage so when i replaced the smaller roller i fliped the larger roller over putting the taper on the inside of cage,, dont no if thats a proublem ,, did the same thing on both sides,,left side has no...

did you use oem parts or ??? 4 sleeves & tubes what kind of play do u have between the two thanks ,,mark

rebuilt planateries & replaced both inner & outter cage rings... and the tracks are new ,,, put new inner rollers and used old outter rollers ,,, theres about 3/16 play there ... the center of the rubber nubber climbs up on the roller making a poping noise when in falls into place,i thought the...

How tight is to tight??? my tracks dont sag ,,but my right side acks like its Misaligned making a popping noise on the cage drive and rubber track snubber only when turning im worryed about it trying to derail any idea on what to look for thanks 4 any input ,,,Mark

little did i know about this machine i only had high flow hoses ,,,,no low flow made a set of low flow hoses & low and behold low flow is now working fine...

low flow not working makes squelling sound when applied the high flow works fine,,, im useing a grapple bucket ,,,if anyone has any idea what i might check for would be greatley aprecheated thanks,,,

leaddog thanks for your post,, same here planetary full of mud bearing in pieces,,, seals are on there way bought bearings from bearing headquarters cup 20.00 and cap 40.00... replaced rollers & outer ring $42.00.. what is uhmwp????and were to buy it?? what is the best sealer to reasemble...

JUST PURCHASED 2002 ASV 4810 I LIKE THIS MACHINE I USE T320 BOBCAT ALOT AND THIS 105 HP ASV IS A BADASS MACHINE,,,, OK CHECKED MY GEAR LUBE TODAY FOUND IT DRY SO YOU GOT TO ADD SOME JUST TO SEE HOW FAST IT RUN OUT !!!!! NEED NEW BEARING AN SEALS IM SHUR,,, DOES ANYONE HAVE THE TIMKEN BEARING...