Recent content by nhmurph

I am back this is what i did Thanks for all the help BOBCAT 909 BACKHOE SWING STEER SYLINDER REMOVAL No you do not have to remove the hoe I removed attachment from loader, extended hoe out on the ground, blocked up the bucked end about 10". Blocked up the frame about the same this allows you...

I never tough about laying the hoe straight out flat on the floor. dooooh makes seance and safer to work on. I will give it a try . Thanks for all the advice. I will post results may take some time

I tried to respond to Flip 57 would not post for me Flip great photos what a job. I was hoping to get mine repaired without doing all that work. I have the hoe and mounting frame up on blocks in my garage, No pressure on swing pin. Top bolt removed Fat washer removed, Looks like a cup washer...

No this thing is locked in on each side with U type clamps swing pin has to be removed to get room to move swing piston

Thanks for all the help. I have my 909 up on blocks in my barn. Now that I know how to do this and not screw it up. The pin in my 909 will not move I will make a press from some Threaded rod and flat stock steel, mount it in the holes each side of the retaining pin ease it out. I will let you...

Bobcat 743 attachment 909 backhoe. Bad leak in swing cylinder. How do I remove the pin that holds hoe attachment to the frame I posted a photo under media Photos 909 backhoe

Swing control leak