mikelv's latest activity

Help Support SkidSteer Forum:

  • mikelv
    Malwarebytes is blocking skidsteerforum when accessed by MS Edge do to "riskware". even telling MB to continue to site does not work. I...
    • 1714223290889.png
  • mikelv
    mikelv replied to the thread NH LT 190b.
    possibly related information. https://www.heavyequipmentforums.com/threads/new-holland-l185-hydraulic-interlock-system-problems.88029/
  • mikelv
    mikelv replied to the thread NH LT 190b.
    That is important information. It makes it much less likely that it is a stuck/bad valve and way way more likely that is it being shut...
  • mikelv
    mikelv replied to the thread NH LT 190b.
    When the engine shuts down is it because it is overloaded (you can feel the heavy load and engine stalling) or because it is being shut...
  • mikelv
    mikelv replied to the thread NH LT 190b.
    It seems an exact match to your symptoms, Check seat and seat belt interlocks too , possibly even doing temp bypass on them to test...
  • mikelv
    mikelv replied to the thread NH LT 190b.
    Did you search this forum before posting the question. Reason I ask is because the specific model you have as a quirk with the aux...
  • mikelv
    mikelv replied to the thread NH LT 190b.
    I think its time to start looking further upstream
  • mikelv
    mikelv replied to the thread NH LT 190b.
    yep, I missed that part too. In that case I would suspect the hose that runs from the main valve body to the aux hydraulics valve has...
  • mikelv
    mikelv replied to the thread NH LT 190b.
    So, another non expert chiming in. I'm with brdgbldr and thinking that the relief valve on the aux circuit is the issue and not the...
  • mikelv
    mikelv replied to the thread Has anyone welded on tie downs?.
    Sounds to me like you know what you are doing. I see no problems with welding up some solid anchor points to make it easier to secure. I...
  • mikelv
    I have a similar issue on my case 1830, its also only when very cold. mine will even drag the starter if I don't center the levers. I...
  • mikelv
    Well seems it takes forever for these posts to show up. Approval required or some such thing. Anyway, for anyone that might be...
  • mikelv
    It all started... So I broke the drive chain from the hydraulic pump to the central drive sprocket while tearing out some briar. I had...
    • 1707876464917.png
    • 1707876949943.png
  • mikelv
    mikelv replied to the thread Need Help with 1835c carb.
    Great news. Hey you might want to invest in a set of hydraulic pressure gauges it does help a lot with hydro issues. I got a set off of...
  • mikelv
    Glad you got it working. It may have had a rebuild in the past and had the tag come off during cleaning or something. Bad news is...
Top