Recent content by m920

Not new here but bought a Thomas 133- nice machine

Can't seem to find the right make and numbers for my hydrolic cartrage filter -T133

Been trying to find an engine rebuild manual for this engine- yanmar 3TNA72E

3 cylinder yanmar about 3500 hours, jus dumped a load and started hearing this clatering sound - parked it and dipstick read 0 and had just change the oil about a month ago and and do look at it every now and then but doesnt really loose any- put another 3/4 of a galon in it and was coming out...

Turned out to be the spline in the main drive shaft started to break away around all the center areas- that motor is fairly unique having a 1.25 tapered shaft to run the sprocket-disk brake on - most likely have to buy a new complete motor.....ouch

definitely the motor, the valve plate looks pretty bad and all the roller bearings are worn flat etc, found a parts source possibly about an hours drive from here, good guts out of another 4000 series eaton - got a new chain coming too, might as well replace that side as well, other side got one...

Char lynn 109-1053-006 or close to it- 4000 series

Does Not appear the seal was leaking but removed the motor which is now on the bench after a lot of work getting it out, be nice to locate a rebuild kit for it or at least find a good used one, probably pull it apart today and see what we find inside and go from there.- thought well I'm at it...

Yes , the motor is still in the machine- numbers on it are 109 1053 006

The good side is like instant with a quick response and the not so good side you have to move the leaver a long way to get it to respond... not an easy motor to take out and swap so i'm wondering if there was a way to swap lines instead with the good side...wish I had a proper shop manual for...

If someone is parting out one that has a good drive motor give me a shout if you would, Thx

Thankyou, much appreciated

Not sure if it is the drive motor that is at fault or what but is much weaker than the other side, more so when the oil gets warm, and a lot more movement in the linkage arm to make it react,- been looking on line for a good used drive motor for this one or at least a rebuild kit, any info...

answered my own questin yesterday, - broken drive chain.

Just bought this one as a project and the only major problem is it seems to lock up on the left hand drive after walking it about 40 feet, hydraulics are strong on the bucket area so that checks out, almost seems like a brake or something is jammed, could walk it about 5 ft and it only got...