Recent content by Luckyperk47

I do not want you to think I am an expert on hydrostatic transmission, but I do have pictures of taking apart. I have put 2 back together. One worked. I have not tested the completely assembled transmission yet. I need to disassemble the transmission that has the stripped the splines and needs...

I am double dumb. Two years ago I managed to completely disassemble one of the Cessna-Eaton 70142 hydrostatic transmissions and put it back together. It actually worked after I got it put back in the Ford CL 20 loader. A bloomin workin miracle. These transmissions are really easy to work on. I...

What was your pump doing that requires it to be rebuilt?

I think some of the Case 1830 used the same pump as the on in my CL20. I think Erickson was making the 1830 for Case. I was able to locate the parts schematic at the following web address is the PDF parts schematic for this tranny. http://www.vickers.sh.cn/pdfs/06-632 Re: Ford CL-20 pump repair...

You are correct the case 1816 will tip! I rotated the wheels so the total machine was 36 inch wide. I got in a hurry trying to get a small culvert covered before it got dark. Backed over about an 8" rock with the bucket down. It bounced and turned over on its side. I hit my head on the top of...

Thanks, frogfarmer I think you are correct on the torque. I was just kicking the thought around and wanted some input. I don't have enough experience on the small engines. I am not familiar with any Kohler. I just got a Wisconsin VH4D 30 hp running I took off a walk behind concrete saw. My first...

I have a Case 1816 that the engine mount was for a Tecumseh 16 or 18 hp. I bought it at an auction for $600 without an engine. I re-engineered the engine mount and re-powered the Case 1816 with a 16 hp. Onan B43M. This Onan engine was my first experience with 2 cylinder. Last summer I started...

This is an answer to an old post on the pump repair on the Ford CL 20. 70142, 70144 and 70145 Cessna Eaton piston pump is the Hydrostatic piston pump that is in my CL20. At the following web address is the PDF parts schematic for this tranny. http://www.vickers.sh.cn/pdfs/06-632.pdf Texas...