Recent content by lgehring

Good evening folks hydra mac 8a serial 2759. I am looking for a good used axle sprocket 6209-122. The hub has 21 splines. Gehl 2500 parts may work also. 6two0-21eight-84six8. thanks, Lowell

Good evening folks I have a hydra-mac 8a ser.2759. I need the axle sprocket pn#6209-122. I am looking for a good used one. There are 21 splines in the hub. Gehl 2500 parts might work also. 62zero-2one8-8four6eight. Thanks, Lowell

Good evening folks hydra mac 8a ser.2759. skid steer. I need the 36 tooth chain sprocket that goes on the axle. Part #6209-122 axle sprocket. Just wondering if anyone has a decent used one? There are 21 splines in the hub which is welded to the sprocket. Perhaps a gehl 2500 part might work also...

Thanks flyerdan I will give that a whirl.

Good morning, hyrda mac 8a. Does anyone have the wheel bearing numbers? The book lists 5209-190,5209-123, 5210-191,5210-124. I would like to find Timken or some other major brand numbers so I can maybe buy them without going through a dealer. The book lists them as cone and cup. I would like to...

Good afternoon. I thought you might like to know that i found the right belt! After digging through the internet and some old Gates books i found #6572 Gates belt. After setting it to 5/8 deflection, warming it at idle and full rpm it needed only 1 more adjustment. After warming it again it had...

Good afternoon. Hydra mac 8a. Has anyone replaced the triple groove belt from the engine down to the pump? It is pn 5409-104 in the book. I bought an elcheapo 37 dollar belt and it keeps stretching. Has anyone found a Gates number, or any other major brand? Thanks for looking, Lowell

Thanks Tazza

Good evening, Hydra mac 8a. I finally got all the drive between the pumps back together and put on a new belt from the engine to the pump pulley. The book says 5/8 deflection with 10 to 12 lbs pressure. At high rpm it really deflects on the top side. has anyone ever watched the belt with the...

Good evening Hydra mac 8a. I finally got all the drive between the pumps back together and put on a new belt from the engine to the pump pulley. The book says 5/8 deflection with 10 to 12 lbs pressure. At high rpm it really deflects on the top side. has anyone ever watched the belt with the seat...

Good evening I have a hydra mac 8a. I need the bearing mount on the left pump that drives the transmission. This is for the bearing in the tripple groove pulley that is driven from the engine. If someone has a parts machine or a spare part let me know. I think the gehl 2500 ,2600 might be the...

I haven't tried them on this part yet. Everything else i have tried from them i can hardly afford. I found this part new from a vendor but it was the last one and they wanted to keep for a pattern. The next batch would be almost tripple the price. That is why i am looking for used. Now i saw the...

Good afternoon I am in desperate need of hydra mac 8a parts. I need the bearing mount on the left side pump. This has the belt drive from the engine to the drive between the two pumps. If anyone has a parts machine or possibly a gehl 2500 or 2600 they might be the same. Call me 62zero-2 one...

Good afternoon I am in desperate need of parts for an old hydra mac 8a with the belt drive from the engine to the drive between the two transmissions. I think the gehl 2500 and 2600 might be the same. If someone has a parts machine setting around i need the bearing mount on the left pump. six...

Good evening I am new to the forum. I need help with a hydra mac 8a sn2759. It has a triple sheave belt drive off the Onan crank shaft to drive the right and left hyd pumps that drive the transmissions. It was cobbled when i got it. The belt pulley was coupled to a thin walled tube by a double...