Recent content by ksstang

I forgot to add, the Bobcat Part# for this is 6707239 if anyone wants to look it up on their site. Thanks, Kyle

Hello, I have a shield that is used on a F-Series Cab (743, 751, etc etc). This is for a Left Hand hinged cab door. Left hand door is when your sitting in the seat looking out, the hinges are on your left hand side. This is the piece that bolts in and seals off the bottom of the cab door. I...

http://s33.photobucket.com/user/ksstang/media/C2CA2F93-F7A1-4B01-8579-BAAA6338AC70_zpskwc9fthj.jpg.html

I don't know why that didn't post the picture!

So I've been searching salvage websites for bobcat parts and scored this brace fairly cheap ($75.00) and some OEM cab hinges for $25.00. After it shipped and I got it, I see that there is obviously some other pieces that I still need to fill the voids where your feet would go when stepping in or...

I could probably fab something. I'd love to see some pics if at all possible of what you did! Thanks!

Anyone?

So I scored a OEM factory cab door for $200.00 yesterday for our 743. It's in decent shape. I'm in need of the panel that bolts in underneath the door to fill the void on each side when the door is on. I have looked and looked with no luck. I also need to two pieces that bolt on the cab frame...

Ok, thanks guys! I appreciate the help! I'm not looking forward to putting it back together. It was quite the task to get apart to say the least. The most frustrating part was getting the clamp loose that held the hard line to the firewall between the motor and hydraulic pump. I was pretty much...

Hello everyone. I am in the process of replacing the two lines that go to the right side drive motor on my father in laws 743. I see why dealers get so much to work on these machines, lol. I ended up having to take pretty much every hose/line loose off the pump just to get the two hoses/line...

Ok, thanks for the replies guys. I might get a couple new springs for now until I decide whether I want to try and fab up some brackets of my own for the strut, or buy the $100 kit off ebay.

Just curious who all has done this? Ours are getting pretty worn out. I'm guessing its the bushing in the lower arms where the bob tach bolts to the lift arms. If the bucket is in the air and you spin around or go back from side to side you can see the bucket move back and forth a few inches...

I saw that the piece that bolts on the cag does have a bend to it. I am going to try and fab something up and hope it works. I'm guessing that it bolts right to the bolt that goes through the lap bar mount. Where the original spring goes? I got to looking at ours yesterday and forsure one spring...

That's what I was going to do. Then I would have to fabricate 2 pieces of metal for the strut to hook too on the bobcat.

That's exactly what I'd like to do, but $109.00 seems a little steep for that. I guess I can always try to fabricate something of my own. I have all the tools to do so, just would need to find the right length of gas strut for it.