Recent content by Hundreddollarbill

643 1981-1992

I would suspect the starter motor. Test right at the starter for current and signal. Either starter brushes or solenoid is probally bad

change fuel filters, check for collapsed fuel primer bulb or fuel line, check for algae in fuel is a good place to start.

Took controller apart and found corrison on circuit board.

Bobcat T190

Case Gurus, Open cab Dozer. Just acted up, wont go forward or reverse unless you pull R or L like a slight turn then goes but not full power and of course makes a slight turn. Took controller apart found nothing suspect. Looking for advice on where to go next, if this dont work or is not...

Tell me what kinds of issues I will have putting the newer bigger 4TNV98 in a 2050 that had a 4TNE88. Will there be fitment or electronic issues?