Recent content by Hamiltonville Farm

IMPOSSIBLE!!! WINCH BOX PULLS 80,000lbs!?! I asked WATCH WES WORK to build this for me! He did not disappoint! One video is the build, the other is the winch getting the hydraulic connections and wiring put together.

I appreciate that, because us Florida boys ain't too familiar with snowblowers😂. I worked it up today but haven't tested it yet. I'll do that tomorrow. 👍

Indeed it is. Check out the wiring on my current video where me and C&C equipment actually hook it up and pull with it. You can see us wire it up. 👍

10-4 thank you for the reply

I understand the 7pin is a can bus type system, but I read somewhere that you shouldn't use the 7 pin to supply power to a non bobcat type attachment. Here's the background/question: I have a hydraulic winch box that has a power/ground (red/black) wire that powers the solenoids that control...

I also get the code U004334-03 DEF PUMP PRESSURE MAX. Any ideas on if I can fix that someway myself? I really don't want to take it to the dealer.

That didn't work. Thanks.

I have a 2019 Bobcat T770 throwing a code E005246--25. Then "SCR" stays illuminated on the screen and the machine will not throttle up. I see that it is a DPF related type error code. I ran the forestry mulcher on the front of the machine for about 6 hours. Then the next morning I just used the...

Got my answer today for the code…. The fan switch (petionometer) had wires that were burned up. Crazy huh? They re pinned the switch and the code went away.

I have the same code in my T-250 track loader. If I find a solution, I’ll post it here

Thanks!

Had code 08-21 High temp come on today. The machine didn’t have any signs of the fault. I took the negative ground off the battery and cleaned the terminal and put it back on. It was loose before I cleaned it. Is there a certain amount of time to keep it off to reset the code? Maybe I put...

I have a 2006 T250. High flow hydraulics with case drain. I recently got an entry level Forestry mulcher (drum style). On the upper left control panel of the machine I select “maximum flow” and also “high flow”. If I select “high flow” only, nothing works. I depress the trigger on the...

River, the channel name is Hamiltonville Farm. The charge pressure on the display is 436. Which I think up to 440 is normal. As a newbie to the forum and to skid steers, I’m not trying to spam the group with YouTube links, LOL. Thanks for the reply.