foton's latest activity

clean around the rod as best as you can,spray some lube on it and try to rock it as gently as you can and hopefully it will free up, I...

I no nothing about those machines, but I see something that I do not really like,look thru the tracks and I see exposed hydro hoses...

pioneers have a lower flow rate compared to that of a flat faced connector so if you are running some attachments that have a hydroulic...

you have looked at the ring gear for damage right?

mine stump bucket uses the bobcat style universal mounting system dimensions , so it is not a bolt on. you would really be to far out...

yes you can bypass the cooler just watch your engine oil and hydro oil temps. and as long as you go somewhat bigger not smaller on the...

I have a stump bucket with a grapple also ,it is good for trenching also.mine is three toothed and about a foot wide.

Dual axle trailer would be best also.

I think that this would be an option if you work by your self. But you need to check the specs. and see if the mini-ex can move a...

does it have a engine oil cooler where it could mix with the engine coolant in a heat exchanger???

I would think that there is a plug real close to the beeper itself that could be disconnected.

wow, you can try that but I do not know if there is enough metal there on the injector, if you can get that to work it will be much...

I would spray some lube on each one for several running cycles the hot and cooling might let the lube work in a little better. I think...

synthetic oils tolerate heat better than conventional oils so if the machine is gonna get hard use maybe I would use synthetic, but...

on the 500 I had I took those two pipes in the rear and used hose from there along the beam to the front of the bucket and added a...