Recent content by dusty

can i just unplug them, i don't use them?

no i didn't

hi guys. got my bobcat up and running. working good too,then all of a sudden when lowering the arms, it started shaking like a jackhammer. I didn't hit the float position, oil level is fine. The tilt did not work correctly either. I shut it off for a minute, restarted and got it to work slowly...

hi guys forgot to tell you i solved mine same problem.i had the connections hooked up wrong. if anyone could post a picture of how its wired it might help.like a dummy i didn;t remember how they went.

when i am sitting in the seat, i get power to aux solenoids by working the switches. I can hear them try to work. still no power to the bics solenid.now what?

Tazza - Old machinist and everybody. I am going to try to explain this better. I took the control valve out, took to Bobcat mech. He put an o ring kit in it to stop a leak. He tested the main solenoid. It is working. This is the one that opens the oil flow so I can move my arms and tilt. I have...

My aux button is yellow on the upper right of the cab. It comes on as normal. The three connectors come from the same line and none of them have power.

Here is my serial number 5158205 - Thanks for your help

I switched the relays and it did not help. I checked the fuses and grounds and nothing wrong. There is no power going through the lines to the valve control. There is three of them. The main solenoid and two aux solenoids. Where does that power come from?

I have no power to the solenoids can I take the globe plug relay and switch with the brake switch relay to see if that works or aren't they the same. All of this was working fine until I took the control valve off. All I did was unplug the three solenoids.

I have a 753 F series bobcat and I just took the control valve off and had Bobcat put a new seal kit in. I reinstalled it and my solenoids won't open up. When I power then separately they work. The fuses are fine. My seat bar works fine. My bics lights are all on correctly. My parking brake...