Recent content by cabrerac

I'm working on it this weekend! I'll let you know. Thanks

I'll see if this can be done, Thanks

Thank you I'm going to try and do this without hooking up the vacum pump.... just move quickly ! Doesnt the hydraulic lines self bleed ? Thanks

Im replacing the hydraulic gear pump on my 40xt and the repair manual is telling me to hook up a vacum pump prior to removing the gear pump. It doesnt go into detail where and how to hook it up. Is this necessary? Appreciate any help.

Im replacing the hydraulic gear pump on my 40xt and the repair manual is telling me to hook up a vacum pump prior to removing the gear pump. It doesnt go into detail where and how to hook it up. Is this necessary? Appreciate any help.

Thanks Seth for responding. I did not find the little pull handle behind the hand throttle. There is one in the lower area right side of where your feet go. I tried pulling this but nothing happen. Itraced the wire and through the access hole on the side of the machine I'm going to try and do it...

how can I raise the bucket to lift the cab when the raise control hydraulics don't work I need access to check the control arms solenoid. I checked all the safety (seat, bar) contacts and they are fine.