Recent content by Bobcat_Ed

my paint is lifting in many area, sounds like the better approach is to feather back the bad areas and rough up the rest and just repaint it. thanks for the advice. -Ed

I am looking to Sand blast and Paint my machine in the spring, I have been getting quotes to have it sand blasted around $800. does anybody have any cost effective ways to strip the paint? has anybody found a low cost sand blaster that could be purchased that will do the job? Thanks -Ed

Trihonu, I don't think I explained my self correctly, I am referring to the case drain line on the machine my backhoe only has 2 lines. My question is can excessive pressure caused from the plow cylinder be vented back to the case drain line?

Hello to all, I am a local mobile welding and repair co. and also do some light construction in central Ma. I have a 763 that I use almost daily and do all my own repairs. I am enjoying this site and have already found it to be helpful solving an issue. We can be seen at Warrenmobilewelding.com

Hi I have this same machine, are you operating the aux with the thumb switch or the trigger switch? the trigger sets the aux for constant flow. -Ed

Thank guys for all your help, I purchased 2 restrictors from bobcat today for $9ea installed them and what a difference. This is my first post and found this group to be very helpful. thanks again -Ed

TriHonu, thanks for all your help! I have one other question on the backhoe side there is a third quick coupling I believe it to be a overflow return line is this ever used in my situation? Thanks, Ed

Hi all, is there any one out there that knows if the speed of my hydraulic can be slow down on this 763, I am using a snow plow attachment and the speed the plow is moving way to fast, I tried running it on the backhoe hyd and on my aux hyd and the both appear to run at the same speed. it looks...