Recent content by billymac

Still Going good after the filter cleaning. Now and I should say I have been having starting issues. I replace the battery with a new delco commercial battery, checked all the connection and it still turns over very hard. I am thinking I have a worn starter. The Dealer wants $550.00 for a...

I'm making progress.... I took the filter on the side of the pump out. I was told it was a filter however I think its more than a filter. its under the seat all the way forward on the right side if sitting in seat in the hyd, pump. It takes a 1-3/8" wrench to back it out and then have a plug...

Hi xcmark, I have the same machine 1110T I'm having issues with forward and reverse travel. Have you had any issues and could lend advice.

What did you find out about your drive issues? I have a JCB 1110T thats having some strange forward reverse problems.

I don't think the joystick is electrical Im pretty sure its mechanical or pressure related. I do have a wire barnes in each joystick but its for the Horn, 2 speed, etc, Ahhh I just thought of something .... I wonder if it could be a short in the 2 speed button ??? But that wouldn't correct...

It seems to lift ok regardless of power, However today it was running perfectly forward and reverse in an open field approx 50 yds back and forth until I used the bucket and then the drive started hesitating again. I will say I thought of this today - I purchased a new battery last week and Ive...

Im not sure if it has a case drain filter. I know it has the large main HYD filter in the engine compartment That I changed last week. I'm thinking its a piece of dirt or something in a valve or joystick controller maybe??

Hello I am new to the forum, I have a 2003 T1110 Track loader. The engine runs strong however the drive forward & reverse,& turning is at a minimum unless I am using the other joystick for the bucket and arm controls. When I first start the machine it will go forward and reverse as if nothing is...