Recent content by bigguyca

ok thanks I will.

I forgot to mention that the canister I spoke of above had a filter like thing in there that looked like the type of material used to make grinding stones for a drill but a lot more course and allows air to blow through it. I just thought I would mention that in case it is the case drain filter...

Ok so I have found out I can't submit photo's on here....bummer. I also feel a little stupid asking so many questions about this, I usually don't have troubles finding this kind of stuff. I took another look under the cab and I have the 2 large hydraulic hoses coming from the drive motor going...

sorry I didn't mean to take over this thread I will start a new one. So the answers and questions can still be related to the question that started it.

ok I will dig around in the dirt under there some more thanks for your help.

They will be inline with the hydraulic lines going out to the drive motors won't they? I have removed the 2 lines on the bottom of the pump that go to the motors, it needed a 1"1/2 wrench to remove. the cylinders that are attached to those fittings aren't smooth they look like you could put a...

does anyone have a picture of the canisters that the case drain filters are in, I pulled apart what I thought to be the canisters and there was nothing inside so either someone before me has removed my filters or I am not looking in the correct place. Thanks.

For everyone that isn't aware and wants to know. I have found out online that there are 2 o rings with finely machined pieces of metal attached to them that turn on each other and keep the oil where it's supposed to be. I can't tell you any more about it as I haven't torn mine apart "yet" If I...

I am wondering what most people are using for gear oil in their final drive's? 75w90 or 80w90 or something else? and synthetic or non? Thanks.

Sorry, it's not the motor I found out it's the back side of the final drive where the motor connects to the final drive but I believe I have found out the answer to my question. Thanks though for the comments.

Hi I haven't been able to find my answer anywhere on her so sorry if this has already been posted somewhere. I have a t250 and have oil leaking ok slightly pouring out of the threads of the bolts on the back side of the right hand drive motor. They are the bolts that go all around the back of...