Recent content by 1ofU

Hello, Thanks for the reply ,, going to replace the relay with a new one,, then I will start checking the wires for ohms specs ,, in the mean time yesterday I removed the cross bar from the traction lock ,, I worked the bobcat for 3 hrs straight in the dirt , and it worked out good ,, just no...

Update """" the solenoid did not take care of the problem ,, I ran it for a hour no problems shut it off and restarted it and it's locked up … the solenoid didn't pop ,,, I raised the cab , unbolted the solenoid and removed the crossbar , bolted back the solenoid down , started it and it didn't...

I have used a white out pen before to check for cracked housings , as well as checked for leaks . 1ofU

Hello, you can go on Ebay and pick one up from 45-100 dollars ,, shipped ..

Taz : Thanks for the reply ,, I also forgot to say that when it's cold and you first get in and start the motor with the lap bar up and lower it , you can hear the solenoid pop , and as well as setting the parking brake you can hear it pop ,, from the solenoid being activated ,, when it's warmed...

Havent posted in awhile on this forum ,, but my 873 has took on a problem started about 6 months ago and has gotten worse .. about 5 months ago .. what it first did was I ran the machine for 5 hrs straight doing dirt work ,, moving .grading etc . as I stopped to move back it wouldn't move like...

i have built several sets of these forks , i use a set all the time to quick pick up stuff as long as you keep the weight around 2000 lbs you should be good to go . i use a set to load a pipe line welder on a trailer or flatbed truck . Jess

The member was Vinito , that helped on the IC program ,, not Vitto ... also i checked your pics again this am and saw you had a light bar is it worth a crap ? i added led on mine 36 per side and it sucks i will be going back to a 55-watt driving lite as the led has a soft blue light area that...

Hello, if you go and see my thread on the backhoe you will see where member Vitto told me to down load a program to post pictures on here , i post mostly gifs now it easier than trying to post several pics . your splitter turned out good from what you started with . i built a splitter to but i...

this puller is all finished , my grandson 12 yrs old welded on the footsteps this morning , i taught him how to weld when he was 10 years old , so i trust his welds on this project . i added the tree guard it's a 10# rebar . i did pull a couple of trees this morning but the ground is still too...

for the most part this puller is done , I am going to add a cross bar about 2.5 ft above the puller to protect the cab if a tree ever falls back into the cab area , will post a pic when it's all done . it turned out pretty good for a weekend project . 1ofU

this is the project for this weekend , a tree puller should be able to tackle tree's up to 10 inches or so , it will be HD unit all 3X3 3/8 tube steel with 1 inch steel for the teeth and the rest is all 1/2 inch steel , the cyclinder i picked up a couple of them on a farm auction site that i buy...

i use 303 from orschelns in a backhoe , here is a chart

here is a gif for you , it easier than trying to post several pictures , on the side fan i used a 1/4 X 3 inch strap made a 90 bend drilled and mounted through the side and then just made a backing plate , i did the same thing on the front fan . on power i used the 12 volt plug in front and on...