|
Re: Building your workshop
5/11/2009 11:40:55 AM
(Total replies: 1)
|
| If you guys need advice on wiring these shops, i do it for a living. I am so jealous of your nice shops. I would give a nut for a nice finish 40x60 with a little heat. I have probably wired close to 1000 of these and always had a dream of doing it someday. All looks great, everyone has a personal touch. That is what makes it yours and not your freinds or neighbors. Enjoy, and shot me any questions. Later Brent. |
|
|
|
Re: Building your workshop
5/14/2009 5:49:04 AM
(Total replies: 1)
|
| sorry so late getting back skiddy,((real busy this time of the year) it is way over a 100 lost track, this is cattle country so i do more barn, shops and garages than houses. They all tell me a house will not make them any money, whitch is right. But don't tell a women that. Later Brent. |
|
|
|
Re: T L 130 2004 won't move
10/26/2009 3:15:20 PM
(Total replies: 1)
|
| Will it do anything such as loader arms or bucket? You check the switch on the lap bar right? Any filter lights on or anything? give more ifo if you can. Brent. |
|
|
|
Re: T L 130 2004 won't move
10/26/2009 7:22:40 PM
(Total replies: 1)
|
| Did you check fuses, it may just be blown fuse, if you have no power to the switch it would do no good to jump it, it said in my book to check blown fuses. I would start there. There is a main screen filter under cab that needs changed every 500 hours with the main filter in the back, but i think things would not have just quit if it was that unless major problem occured. I really think it might be a fuse, sounds silly but easy fix. It could also be your engine to pump attachment. Start it ... |
|
|
|
Re: T L 130 2004 won't move
10/27/2009 3:27:41 AM
(Total replies: 1)
|
| If you have a test light make sure you have power at fuse block. There are some fuse links a the back just above the battery. I would first check power at the fuse that controls safty switches making sure the block has power, then make sure you have power to the safty switch and through and back. Do you have a manual so you know fuse layout. Mine is a 2003 so i don't know if it is the same. Mine has a 10a (saftey relay generator) and a 30a (arm float, lever lock, auxiliary). Instrument ... |
|
|
|
Re: T L 130 2004 won't move
10/29/2009 5:50:35 PM
(Total replies: 1)
|
| Did you figure anything out? just wanted to know how you came out, i hope with good luck. Brent. |
|
|
|
Re: HELP!!! Mustang Starts, Then Dies!!
11/3/2010 5:25:49 PM
(Total replies: 1)
|
| Check the lap bar plug, wires and maybe switch, my brother has 2064 that will do that if the lap bar is unplugged. Good luck Brent. |
|
|
|
Re: HELP!!! Mustang Starts, Then Dies!!
11/4/2010 4:24:21 AM
(Total replies: 1)
|
| I would think it is some kind of safety, maybe in the seatbelt if you have to have it lock to run it, i really not that familiar with those machine. Brent. |
|
|
|
Re: Shop airlines
8/25/2010 6:48:32 PM
(Total replies: 1)
|
| My brother and i just done a shop for my dad and his new one, with steel, if you have a conduit bender and know how to run one it is quite simple and is not that high compared to copper. If you want to bend rigid, say 3/8 you use a 1/2 emt bender and for 1/2 use a 3/4 emt bender. Just some ideas. Brent. |
|
|
|
Re: Depressurizing aux hydraulics
8/25/2011 4:31:27 PM
(Total replies: 1)
|
| I shut mine of then turn the key back on lower the bar, and move the foot pedal back and forth before i unhook and it works most of the time for me. Good luck Brent. |
|
