Hey all. New to repairing skidsteers here...but I'm not new to wrenching at all. So got this used LS180 and so far have had to replace the Alternator, Lower Rad Hose, T-Stat, Pedal Solenoids, Cleaned Safety Switches, and had to free up the bushings on the Parking Brake (manual style)... while tearing into the parking brake i had to remove the control handles and linkages, and now they're slightly out of alignment...I've managed to figure out most of it and its not bad. (Creeps to the left at full forward, creep left at full reverse, when released from full forward it stops and when released from full reverse creeps forward a slight bit) I've done a lot of looking around the internet but no such luck on finding the linkage adjustment procedures for making this thing feel perfect. Can anyone help me out by explaining the procedure, or linking/posting/emailing me the service manual? Thanks all!!
