Case 1845c Hydraulisc died

Hi, the hydraulics for the bucket & arms just quit while I was using the machine, I'm assuming (hoping) it is just a safety switch somewhere as the pump is still turning and no forewarning of this happening. Am I on the right track and where are the safety switches located? thanks

I would start with the seat switch maybe just a lose pop can then check the swtch and wireing and safty belt if it has one

antfarmer2 said:

I would start with the seat switch maybe just a lose pop can then check the swtch and wireing and safty belt if it has one

Click to expand...

Any lights or codes if so put your serial # up O M is good at that

antfarmer2 said:

Any lights or codes if so put your serial # up O M is good at that

Click to expand...

no lites on the panel, there hasn't been a switch on the seat belts or seat since I've had the machine. What codes are you asking about

Murphy said:

no lites on the panel, there hasn't been a switch on the seat belts or seat since I've had the machine. What codes are you asking about

Click to expand...

Some of the newer ones will put out codes I would look where they bypassed the safetys for a bad connections